Top of filter panel with Venturi-shaped openings

Applications

	Separation of emulsion mist
	Chemical industry
	Separation of aerosols
	Absorption of grinding dust
	Industrial vacuum cleaners
	Separation of welding fume
	Product recovery
	Food industry

Advantages

	Capable of bearing high dust loads
	High mechanical load bearing capacity by metal reinforcements as well as pleat tips firmly joint
	Top of panels with Venturi-shaped openings make cleaning more efficient
	Exceptionally long lifetime
	Excellent quality

Features
The filter panels are installed from the clean side either vertically or horizontally.
They are suitable for operating temperatures up to 60 °C. Filter panels for higher temperatures, special sizes, metal parts of stainless steel or FDA-approved models are available on request.
Filter panels made by R+B Filter convince by their excellent quality.

Filter Media
The filter medium is adjusted to the application in order to provide optimum performance in filtration.
The pleated filter media consist of polyester non wovens or needle felts. They can be equipped
antistatic, oil and water repellent, with special coatings or membranes. They are certified in accordance with DIN EN 60335-2-69 appendix AA and are suitable for the filtration of health hazardous dusts.

Advantages
Venturi-shaped openings at the top of the filter panel enhance the efficiency of jet pulse cleaning.

Accessories
Venturi nozzle part no. 984065,
solenoid valves, gaskets,
electronic control systems

Measures
 

Width [mm]	Length [mm]	Filter area [m²]
520	605	1,4
520	605	2,1
520	985	2,4
520	985	3,6
520	1205	2,8
520	1205	4,2

Technical changes reserved